Shop all products

FIAT DUCATO KEY HOLDER – KEEP YOUR KEYS READY TO HAND A compact wall-mounted holder designed to keep your Fiat key in one reliable, easily accessible place. Ideal for motorhomes, campervans, workshops or the home, it can be fitted to a wall, door or inside a storage niche. The key can remain attached to a keyring while stored in the holder. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Keeps your Fiat key organised and easy to find - Suitable for keys attached to a keyring - Compact, space-saving design - Can be mounted on a wall, door or other suitable flat surface - Two mounting options available - Dimensions: 35mm x 30mm x 20mm ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MOUNTING OPTIONS Please select one of the following variants: - 3M Tape – flat-backed holder supplied with 3M self-adhesive tape - Screw Mount – holder with a mounting hole, supplied with one screw and one wall plug Please ensure the mounting surface is clean, dry and suitable for your selected fixing method. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed for keys with the following references: - Fiat-KS-13 - Fiat-SH-15A Please compare your key with the listing photographs and check its reference before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Manufactured from strong, durable PETG. Available in black only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE - Key holder and selected mounting hardware only - Keys and keyrings are not included - Items shown are for illustration purposes only - The supplied wall plug may not be suitable for every wall type; use an appropriate fixing where necessary ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in black only.

AIR VENT CUP HOLDER FOR CITROEN JUMPER & FIAT DUCATO A practical dashboard cup holder designed to fit into the vehicle’s air vent. It keeps a suitable drink container within easy reach while travelling and features a strong, lightweight design. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Fits directly into the air vent - Helps keep drinks secure and accessible - Strong and durable PETG construction - Ventilated holder design - Easy to fit with no drilling required - Black finish complements most vehicle interiors ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed for: - Citroen Jumper - Fiat Ducato Please compare your air vent carefully with the installation photo before ordering, as vent designs can vary between model years and vehicle specifications. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made from strong, durable PETG with a black finish. Fine surface lines and minor cosmetic variations are normal characteristics of this type of product. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Cup holder only — drink container and vehicle are not included. Items shown are for illustration purposes only. Ensure the holder is fitted securely before use. Use only with suitably sized containers and do not allow it to obstruct vehicle controls or your view while driving. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in black only.

ROTATING MAKEUP, LIP GLOSS & JEWELLERY ORGANISER A decorative crown-style rotating stand for keeping lip gloss, makeup and jewellery neatly organised and easy to reach. Designed to hold P.Louise lip gloss products alongside compatible items from many other brands. The spinning design provides convenient access to the storage spaces around the stand. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED / FEATURES - Multiple openings for lip gloss and cosmetic products - Crown-style upper section with hooks for jewellery and accessories - Sectioned lower tray for bracelets, hair accessories and other small items - Rotating design for easy access - Decorative pink finish - Suitable for dressing tables, makeup stations and display areas ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Compatible with P.Louise lip gloss and similarly sized cosmetics from other brands. Cosmetic packaging varies between products and brands, so please check the size of your items before purchasing. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made from durable PETG with a pink finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Stand only — lip gloss, makeup, jewellery and accessories are not included. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in pink only.

CACTUS SCRUNCHIE HOLDER — HAIR BOBBLE AND SCRUNCHIE STAND Keep your scrunchies tidy, visible and off the dressing table with this cactus-shaped holder. Two smooth cactus towers slide your scrunchies on and off in seconds, while the desert-style tray at the base gives you somewhere to drop clips, grips, rings or small odds and ends. A fun, practical storage piece for a bedroom, dressing table, bathroom or student room. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Two cactus towers sized for scrunchies and hair bobbles - Holds several scrunchies per tower - Oval tray base for clips, grips, bobby pins and small items - Ribbed cactus detailing with a sand-effect tray insert - Free-standing — no fixings or wall mounting needed - Stable weighted-style base footprint - Wipe clean with a damp cloth ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ IDEAL FOR - Dressing tables and bedroom shelves - Bathroom and vanity storage - Student rooms and university halls - Birthday, Christmas and stocking filler gifts - Anyone who loses scrunchies down the back of a drawer ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL AND FINISH Made from durable PETG plastic with a smooth ribbed finish. Hard-wearing, lightweight and easy to keep clean. Available in green and brown as shown. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Holder only — scrunchies, hair accessories and any other items shown are not included. Items shown for illustration purposes only. Not a toy. Keep away from young children. Suitable for dry indoor use only. Not designed to hold wet hair accessories or to be submerged. Colours may vary slightly between batches. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

Make the most of your Skoda Enyaq or Elroq's centre console with this custom-fit insert. Designed to drop neatly into the front console tray, it adds a dedicated cup holder on one side and a handy storage compartment on the other — ideal for coins, keys, cards, or your parking token. WHAT'S ORGANISED - Circular cup holder for drinks, keys, or loose change- Rectangular storage tray for cards, coins, or parking tokens- Single-piece design for a snug, drop-in fit — no trimming or modification needed- Lifts out easily for cleaning ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Skoda Enyaq and Skoda ElroqLeft-hand drive (LHD) vehicles only ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Durable PETG construction. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Insert only — vehicle and console tray not included. Designed for LHD vehicles only; not compatible with right-hand drive models. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in Black only.

Finally, a cup holder that actually fits a proper mug. This custom 3D printed insert drops into the Skoda Octavia MK3 centre console cup holders and accommodates two standard mugs — perfect for grabbing a brew before the morning commute. No modifications needed — simply place the insert into the existing cup holders and you’re good to go. Printed in-house by HSK 3D using black PETG for heat resistance and durability, so it won’t warp with hot drinks.

Custom 3D printed cup and water bottle holder insert designed specifically for the Skoda Kodiaq 1st gen (2017–2024). Transforms the central cup holder area into a more versatile storage space with a dedicated spot for a larger water bottle plus extra trays for small items like coins, keys, or sweets. Simply drops straight into the existing cup holder — no tools, no modification, no adhesive needed. A practical upgrade that makes the interior feel more organised and purpose-built. Available in a range of colours — choose from the dropdown or message us if you need something specific. Printed in-house by HSK 3D using PETG for strength and heat resistance.

Give the rear of your Skoda Octavia MK3 RS/VRS a sportier, more aggressive look with these 3D printed diffuser fins. Set of 4 fins that sit neatly beneath the rear bumper for a clean, OEM+ style upgrade. Installation is straightforward — remove the 4 factory screws from the underside of the rear bumper and reinstall them through the mounting holes on each fin. Each fin is numbered 1–4 and installs left to right when looking at the rear of the car. No cutting, no modification to the bumper required. Each fin also features a recessed area on the contact side for automotive double-sided tape if you want extra security (tape not included). Please note: this version is not compatible with vehicles fitted with a towbar. If you have a towbar, please message us before ordering. Printed in-house by HSK 3D using durable black PETG for a strong, weather-resistant finish. If you need a specific colour, drop us a message before ordering.

Wall-Mounted Wader & Boot Hanger Keep your waders, wellies and rubber boots stored upside-down to drain, dry and hold their shape. This wall-mounted hanger supports the boots by the soles/heels, saving floor space and keeping your porch, garage or utility area tidy. Ideal for fishing, hunting and general outdoor use. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Holds one pair of boots or waders upside-down - Twin cradle design supports boots by the soles - Keeps footwear draining and airing to prevent damp and odour - Saves floor space and keeps entryways tidy - Fixed screw holes for a secure wall mount - Screws and wall plugs included ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Universal fit for most rubber boots, wellingtons, neoprene chest waders and thigh waders. Suitable for adult and youth sizes. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made from durable PETG for strength and long-lasting indoor and sheltered outdoor use. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Hanger only — boots and waders not included. Items shown for illustration purposes only. Fix to a solid wall using the supplied fixings; ensure fixings are appropriate for your wall type. Dispatched from the UK | Fast Posting | HSK 3D Black

Bald Man's Comb - a novelty accessory for anyone who's decided hair is overrated. This tongue-in-cheek design pokes fun at going bald, making it a fun little pick-me-up for yourself or a great laugh as a gift for a bald or balding friend or family member. FEATURES - Curved, comb-shaped silhouette with "BALD MAN'S COMB" text along the handle - Hole at the end for hanging on a keyring, hook, or display - Lightweight and durable MATERIAL & FINISH Made from durable PETG. PLEASE NOTE This is a novelty item intended for fun and display - not a functional hair-styling tool. Item shown for illustration purposes only, colours may vary slightly from photos. Dispatched from the UK | Fast Posting | HSK 3D Available in black with white text only

Never forget how to tie it right. This knot reference tag clips straight onto your backpack, harness, or gear loop with a carabiner, keeping six essential knots on hand whenever you need them — perfect for hikers, campers, climbers, and anyone who spends time outdoors. WHAT'S SHOWN - Super Munter Hitch - Double Overhand Stopper - Figure 8 Follow-Through Loop - Double Fisherman's Bend - Prusik Knot - Water Bowline MATERIAL & FINISH Made from durable PETG plastic, lightweight and weather resistant. Finished in white with blue and orange knot detailing for easy reading at a glance. PLEASE NOTE Tag only — carabiner and backpack shown are not included. Items shown for illustration purposes only. This tag is intended as a handy reference and memory aid — always practise and confirm your knots before relying on them in a real climbing, rescue, or safety-critical situation. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in white with blue and orange detail only.

Grocery Bag Carrier Handle Carry all your shopping in one trip. This sturdy, ergonomic handle lets you lift multiple carrier bags at once without the straps digging into your fingers. A comfortable, heavy-duty solution for grocery runs, market trips and hauling shopping from car to kitchen. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Holds over 10 bags at once, depending on bag size - Heavy-duty design tested with a 16kg load with no bending or deformation - Wide, contoured grip spreads the weight and reduces strain on fingers and hands - Integrated shopping trolley token slot built in for added convenience - Lightweight and compact enough to keep in a pocket, bag or glovebox ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made from tough, durable PETG for excellent strength and impact resistance. Available in black only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Bag holder only — bags and trolley token not included. Items shown for illustration purposes only. On first use the token slot may feel slightly tight. Insert and remove the token a few times to ease it in, or gently press it into place with pliers. It will settle to a perfect fit after a few uses. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

Keep six essential knots close at hand wherever your adventures take you. This knot reference tag clips onto your backpack, harness, or gear loop with a carabiner, making it easy to check a knot on the trail, at the crag, or around camp — great for hikers, campers, climbers, and Scouts. WHAT'S SHOWN - Bowline Knot - Zeppelin Bend - Sheet Bend - Figure 8 - Square Knot - Clove Hitch MATERIAL & FINISH Made from durable PETG plastic, lightweight and weather resistant. Finished in white with blue and orange knot detailing for easy reading at a glance. PLEASE NOTE Tag only — carabiner and backpack shown are not included. Items shown for illustration purposes only. This tag is intended as a handy memory aid — always practise and confirm your knots before relying on them in a real safety-critical situation. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in white with blue and orange detail only.

Keep your trading card scanning setup tidy and hands-free with this phone stand and storage box combo. It holds your phone at the ideal angle above an open viewing area, so you can scan and catalogue Pokemon, MTG, and other TCG cards without holding your device the whole time. A built-in storage compartment underneath keeps your cards close at hand while you work. FEATURES - Angled phone stand holds your device steady for hands-free card scanning - Built-in storage box beneath the stand keeps cards within easy reach - Open viewing window positioned for accurate scans with grading and pricing apps - Single-piece compact design, ideal for desk or table use - Suitable for Pokemon, MTG, and other standard-sized trading cards MATERIAL & FINISH Printed in durable PETG. PLEASE NOTE Stand only — phone and cards shown are for illustration purposes only and are not included. Designed to fit most smartphones; very large phones or those in bulky cases may not sit securely — please check your phone's dimensions before purchase. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in white only.

Autodarts Camera Mount for Target Corona X3 Dartboard Ring Custom clip-on camera mounts designed specifically for the Target Corona X3 dartboard ring, turning it into a full Autodarts-compatible setup in minutes. No drilling, no modification — the mounts clip securely onto the existing Corona ring and hold each camera in the correct position for accurate dart detection. Supplied as a set of 3 mounts. Available with or without cameras. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ OPTIONS AVAILABLE: - Mounts only (set of 3) — use your own compatible cameras- Mounts + 3x OV9732 USB cameras — plug and play, no driver needed ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE CAMERAS: - OV9732 1MP 100° USB Camera (1280x720, manual focus, 3m cable)- HBV USB cameras All camera mounting screws included. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE DARTBOARD RING: - Target Corona X3 Please verify your ring model before ordering — this mount is designed specifically for the Corona X3 profile. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH: Printed in black PETG for a strong, secure hold. If you need a specific colour, drop us a message before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE: Camera mounts only unless the camera bundle option is selected. Target Corona X3 ring and dartboard are not included. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in black — message us for alternative colours.

Replacement octagonal base for Lemax Christmas Village street lamp posts. Sold as a pack of 10 bases only — the lamp post and lighting element are not included. WHAT'S INCLUDED - 10x octagonal replacement bases- Designed to fit standard Lemax-style street lamp post pins- Built-in wire channels for neatly routing lighting cables COMPATIBILITY - Suitable for Lemax Christmas Village street lamp posts and similar miniature village lamp accessories- Please check the pin/socket size on your existing lamp post against the photos before ordering MATERIAL & FINISH - PETG PLEASE NOTE Base only — lamp post, light fitting, wiring and battery pack are not included. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Various colours available.

4 TIER DISPLAY RISER STAND A compact stepped display stand that lifts each row above the one in front, so everything stays visible and easy to reach. Ideal for perfume bottles, nail polish, skincare, crystals, miniatures, funko pops, trinkets and collectibles. Sturdy braced construction with a low-profile base that sits flat on any shelf, dresser, worktop or counter. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - 4 stepped tiers for clear front-to-back visibility - Wide flat shelves suited to bottles, jars, pots and boxed items - Triangular bracing under each tier for rigidity - Low-profile base — no overhang, sits flush on a shelf - Smooth matte finish, wipe clean - Freestanding — no fixings or wall mounting needed ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ DIMENSIONS - Width: 230 mm - Depth: 220 mm - Height: 147 mm Please measure your shelf and your items before ordering to confirm fit. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made from PETG — a tough, durable plastic with good heat and impact resistance. Matte black finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Display stand only — bottles, collectibles and any other items shown are not included. Items shown for illustration purposes only. Not intended to carry heavy loads. Intended for lightweight display items only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Various colours available.

Cat Food Pouch Squeezer - Pack of 2 Make mealtime quick and mess-free with these cat food pouch squeezers. Designed to fit neatly over wet food sachets, they let you push every last bit of food out cleanly - no more sticky fingers or wasted food stuck in the corners of the pouch. WHAT'S INCLUDED - 2 x Cat Food Pouch Squeezers FEATURES - Squeezes food pouches from the sealed end towards the opening- Three grooves catering for different pouch thicknesses- Ergonomic shape for a comfortable, secure grip- Reduces food waste by pushing out every last portion- Quick to rinse clean after use COMPATIBILITY - Suitable for standard wet cat food sachets/pouches- Works with most popular pouch brands and sizes MATERIAL & FINISH Made from durable PETG plastic. PLEASE NOTE Squeezers only - food pouches, bowls and other items shown are for illustration purposes only and are not included. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Various colours available.

Keep your hobby paints organised and within easy reach with this paint and brush rack. Designed to hold up to 24 acrylic paint bottles, it's compatible with Vallejo, Army Painter, and other brands that use the same dropper bottle shape. A dedicated section holds brushes of various sizes upright and ready to use. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED - Up to 24 x 17ml acrylic paint bottles - Brush holder section with mixed hole sizes for different brush widths - Tiered shelf design for easy visibility of every bottle ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY - Vallejo Model Color / Game Color range - Army Painter Warpaints range - Other brands using the same standard dropper bottle shape ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH PETG. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Rack only — paint bottles, brushes, and palette shown for illustration purposes only, not included. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Various colours available.

Keep your paint collection organised and easy to access with this sturdy honeycomb-style storage rack. Designed to hold 54 bottles in a 9x6 layout, it's ideal for hobby painters who want their colours displayed upright, secure, and within easy reach. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED - 54 individual bottle slots arranged in a 9x6 grid - Honeycomb design keeps bottles upright and separated - Open-front slots for quick colour identification - Compact footprint for desk, shelf, or workbench storage ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed to fit standard 17ml dropper-style paint bottles, including Vallejo Model Colour and similar ranges from other brands. Please check bottle dimensions against the photos before purchasing if using a different brand. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made from durable PETG plastic for strength and long-term durability. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Rack only — paint bottles shown are for illustration purposes only and are not included. The base features a hollow cavity that can be filled with plaster (or a similar weighting material) to add stability and prevent tipping once the rack is loaded with bottles. This step is optional but recommended for a more secure, stable stand. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Various colours available.

A two-finger grip holder designed for the MJ KwikPen injection device, giving you a steadier, more secure hold while handling the pen. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Dual finger loops for a stable two-handed grip- Open central channel keeps the pen window and dose display visible- Lightweight and easy to hold ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY - Designed to fit the MJ KwikPen (as pictured)- Please check the size of your pen against the photos before ordering ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH PETG. Available in multiple colours. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Grip holder only — pen not included, shown for illustration purposes only. This is a novelty grip accessory and is not a certified medical device; it is not intended to diagnose, treat, or affect dosing or injection technique in any way. Always follow the instructions provided with your medication and consult your healthcare provider or pharmacist with any questions about administering your injection. Dispatched from the UK | Fast Posting | HSK 3D Various colours available.

Milwaukee M12 Packout Drawer Insert — 3/8" Ratchet Custom-fit drawer insert designed for the Milwaukee M12 3/8" Ratchet, keeping your ratchet and spare batteries organised and secure inside your Packout drawer system. WHAT'S ORGANISED - M12 3/8" Ratchet - 2x M12 CP 2.0 batteries - 1x M12 XC 4.0 battery ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY M12 3/8" Ratchet UK / EU Model: M12BIR38 US Model: 2457-20 (same tool, sold under a different model number in North America) Designed to fit Milwaukee PACKOUT 3-Drawer and 4-Drawer Toolboxes. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Durable PETG construction for long-lasting strength and impact resistance. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Insert only — ratchet, batteries, and Packout drawer are not included. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in multiple colours

Keep your Milwaukee M12 Cable Stapler and staple cartridges organised and protected on the go. This custom-fit insert holds the stapler securely in the centre with dedicated slots either side for your cable staple cartridges, keeping everything tidy and ready for the next job. WHAT'S ORGANISED - Central cradle for the M12 Sub Compact Stapler body - Cable staple cartridge slots either side of the tool - Holds a full box of staples when packed out, alongside the stapler cartridge ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY M12 Sub Compact Stapler UK / EU Model: M12BST UK / EU Article No: 4933459634 US Model: No confirmed direct equivalent — the US 2447-20 uses a different staple format ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made from durable PETG plastic for long-lasting daily use. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Insert only — stapler, staples and case not included. Items shown for illustration purposes only. Dispatched from the UK | Fast Posting | HSK 3D Available in black only.

METRIC SOCKET & ACCESSORY ORGANISER FOR MILWAUKEE PACKOUT A custom-fit insert liner for the Milwaukee Packout Compact Slim Organiser, designed to hold the metric sockets from the SHOCKWAVE 3/8" Drive 43pc SAE & Metric Impact Socket Set — plus extensions, adaptors and a spare parts tray. Every socket sits in its own labelled-position pocket so you can see at a glance what's there and what's missing. Built for anyone working on metric fasteners who wants to carry only what they actually use. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED - 12 x metric deep impact sockets (8mm - 19mm)- 11 x metric standard impact sockets- 3/8" drive extension bars (76mm and 152mm)- Long extension bar- Universal joint / wobble adaptor- 1/4" hex to 3/8" square drive adaptor- Compact ratchet head- Open utility tray for torx bits, hex sockets and spares ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Case🇬🇧 UK / 🇪🇺 EU Article No: 4932471065 (Packout Compact Slim Organiser)🇺🇸 US Model: 48-22-8436 (Packout Compact Low-Profile Organizer) Socket Set🇺🇸 US Part No: 49-66-7009 — SHOCKWAVE Impact Duty 3/8" Drive SAE & Metric Deep 6 Point Socket Set, 43pc🇬🇧 UK / 🇪🇺 EU: No confirmed equivalent set — this set is sold under the US catalogue only. UK/EU buyers with individual SHOCKWAVE metric sockets should check dimensions against the photos before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made from PETG — a tough, impact-resistant material that handles workshop knocks, oil and temperature swings without going brittle. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Insert only — case, sockets, extensions and adaptors not included. Items shown for illustration purposes only. This insert holds the metric sockets from the 43pc set only. There is no provision for the SAE (imperial) sockets. The 1/2" to 3/8" adaptor pocket was measured against a third-party adaptor. Fit with the Milwaukee equivalent is expected but not independently confirmed — please check dimensions against the photos if this matters to you. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Various colours available.