Shop all products

TRIPLE 52MM GAUGE CONSOLE BASE FOR HONDA CIVIC EG This triple gauge base is designed for Honda Civic EG enthusiasts looking for a clean way to integrate 52mm gauges into their vehicle interior. It is specifically engineered to fit the air conditioning console of 1992-1995 hatchback and sedan models, providing a sleek housing for pressure, voltage, temperature, or other diagnostic indicators. Designed to mount securely without requiring permanent modifications, this base preserves the original dashboard appearance while offering a functional setup for your gauges. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - 1 x Triple gauge base (for 3 x 52mm gauges) COMPATIBILITY - Honda Civic EG (Hatchback and Sedan): 1992-1995 models. MATERIAL & FINISH - Material: PETG. This provides a durable finish capable of handling the temperature variations typical of a vehicle interior. PLEASE NOTE - Gauges not included. Items shown are for illustration purposes only. Dispatched from the UK | Fast Posting | HSK 3D

HANDBRAKE BOOT COLLAR RING FOR VW JETTA/GOLF MK3 This replacement handbrake boot collar ring is designed for Volkswagen Jetta Mk3 and Golf Mk3 models produced from 1991 to 1998. It is precision-engineered to mount to the upper section of the handbrake lever, effectively securing the leather or vinyl handbrake boot in place for a clean interior finish. This collar ring replaces OEM part number 1H0 711 336 and is compatible with both standard and chrome handbrake buttons. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - 1 x Handbrake boot collar ring - Precise OEM-style fitment using integrated mounting tabs - Compatible with both standard and chrome handbrake buttons COMPATIBILITY Volkswagen Jetta Mk3 (1991–1998) Volkswagen Golf Mk3 (1991–1998) MATERIAL & FINISH 3D printed in the UK from durable PETG. Designed for robust, impact-resistant performance that withstands daily use in automotive environments. PLEASE NOTE This listing is for the collar ring only. Handbrake boot and lever assembly are not included. Items are shown for illustration purposes only. Before installation, please ensure all remnants of the original, broken clip are fully removed from the handbrake lever to allow the new collar to seat correctly. Dispatched from the UK | Fast Posting | HSK 3D

INNER DOOR HANDLE SURROUND FOR DATSUN NISSAN 120Y SUNNY B310 These inner door handle surrounds serve as a direct replacement for worn or damaged original Datsun and Nissan interior trim. Designed to maintain the aesthetic of your vehicle interior, these parts match the dimensions of the original components to ensure a simple, modification-free installation. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - 1 x Left side inner door handle surround - 1 x Right side inner door handle surround - OEM-style finish COMPATIBILITY - Datsun/Nissan 120Y & Sunny B310 - Datsun B210 - Datsun B110/B120 Pick-up - Datsun 720 Pickup - Datsun 510/Z-series models MATERIAL & FINISH 3D printed in the UK from PETG. Features a sleek, durable, OEM-style finish suitable for a standard vehicle interior. PLEASE NOTE For 510 and Z-series models, please verify the handle shape and dimensions against the provided photos to ensure compatibility with your specific trim level. Items shown for illustration purposes only. Dispatched from the UK | Fast Posting | HSK 3D

TOPLOADER TRADING CARD STORAGE BOX WITH SLIDING LID This sturdy storage box is designed to hold approximately 130 standard 3x4 toploader trading cards. It features a durable dovetail sliding lid that provides both secure closure and easy access to your collection, keeping your cards neatly organised. WHAT'S ORGANISED / FEATURES - 1 x storage box bin - 1 x sliding dovetail lid - Capacity: holds approximately 130 standard 3x4 toploaders COMPATIBILITY - Standard 3x4 trading card toploaders: Compatible MATERIAL & FINISH - Material: PETG. This box is tough and impact-resistant, suitable for consistent use in your hobby room. PLEASE NOTE - Storage box only — toploaders and cards not included. Items shown for illustration purposes only. Dispatched from the UK | Fast Posting | HSK 3D

GRAVITY-FED POKÉMON BOOSTER PACK DISPLAY AND DISPENSER Organise and showcase your trading card collection with this gravity-fed booster pack dispenser. Designed specifically for Pokémon booster packs, this unit allows you to load packs from the top, where they slide down automatically for easy access. This dispenser provides a tidy, professional way to display your collection on any shelf or in a display cabinet, ensuring your packs remain neatly stacked and ready for use one at a time. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Gravity-fed dispensing system for one-by-one pack removal - Packs are loaded from the top and slide down for display - Specifically designed for Pokémon booster packs - Compact and sturdy build suitable for collectors and display shelves COMPATIBILITY - Pokémon trading card game booster packs MATERIAL & FINISH - Made in the UK from high-quality PETG. The finish is durable and designed to handle daily use on a shelf or desk. PLEASE NOTE - Booster packs shown for illustration purposes only and are not included. Dispatched from the UK | Fast Posting | HSK 3D

TRADING CARD CENTERING TOOL HOLDER FOR POKEMON & SPORTS CARDS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dedicated centering tool holder tray designed to assist with pre-grading your trading cards. Holds your card securely in position while you overlay your centering tool for accurate alignment checks. Ideal for Pokémon and sports card collectors looking to inspect card centering straight out of the pack before submitting for professional grading. WHAT'S ORGANISED - 1 x recessed slot for standard Pokémon and sports trading cards - 1 x top recess for 5.5 in x 3.5 in centering tool overlay COMPATIBILITY Legends Centering Tool (5.5 in x 3.5 in) Standard Pokémon & Sports Trading Cards MATERIAL & FINISH 3D printed in the UK from durable PETG. Built for regular use on your card sorting workspace. PLEASE NOTE Insert tray only — Legends Centering Tool overlay and trading cards not included. Items shown for illustration purposes only. Handle cards with care when placing into and removing from the card slot. Dispatched from the UK | Fast Posting | HSK 3D

XXL CARD STORAGE BOX FOR 480 STANDARD TRADING CARDS A large-capacity card storage box designed to hold up to 480 standard-size trading cards without sleeves. Compatible with Magic: The Gathering, Pokémon TCG, One Piece TCG and any other standard card game format. The box and lid together measure 200 x 77 x 105 mm, giving a compact footprint that still fits a full deck collection. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED - Up to 480 standard trading cards (without sleeves) - Single storage compartment running the full internal length of the box - Separate lid included ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Compatible with standard card game formats including: - Magic: The Gathering (standard card size) - Pokémon TCG (standard card size) - One Piece TCG (standard card size) - Any other trading card game using standard 63 x 88 mm cards Capacity is stated for unsleeved cards. Sleeved card capacity will be lower — see PLEASE NOTE below. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ DIMENSIONS - Box (without lid): 200 x 77 x 100 mm - Box (with lid): 200 x 77 x 105 mm ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. PETG is tough and impact-resistant, handling everyday knocks and temperature swings well. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Lid included — no additional accessories included. Items shown for illustration purposes only. Capacity of 480 cards is for standard unsleeved cards only. Sleeved cards will reduce the number that fit — exact sleeved capacity is unconfirmed; check the photos and dimensions before ordering if you plan to store sleeved cards. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

9-CARD TOP LOADER DISPLAY STAND This display stand holds nine standard top-loader cards in a tiered fan arrangement across three rows of three, raising the rear rows so every card stays visible from the front. The stepped base slots each top loader in at an angle, giving a clean, graduated presentation on a shelf or desk. WHAT'S ORGANISED - 3 x front-row top-loader card slots - 3 x mid-row top-loader card slots - 3 x rear-row top-loader card slots (raised tier for full rear visibility) COMPATIBILITY Designed to hold standard trading cards in standard top loaders. Compatible with top loaders sized for standard trading cards (approx. 63 x 88 mm). Not designed for oversized, jumbo or graded-slab holders. MATERIAL & FINISH 3D printed in the UK from PETG. The material is tough and impact-resistant, handling everyday use and the occasional knock without cracking or warping. PLEASE NOTE Display stand only — top loaders and cards are not included. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

BUMPER PROTECTION CASE FOR ACE GRADED SLABS A precision-fit outer bumper shell designed specifically for Ace Graded slabs. The form-fitting frame wraps securely around the slab with no rattling or shifting, keeping the slab surface free from scratches and scuffs while leaving the card artwork and label fully visible through the clear slab window. Suited to collectors who want a dedicated, snug-fitting layer of protection for storage, display or transport — without the bulk of a generic one-size-fits-all protector. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Precision-fit shell tailored to Ace Graded slab dimensions - Open-faced design — card artwork and label remain fully visible - Guards against scratches, scuffs and minor everyday impacts - Snug, secure fit with no rattle - Clean, minimal profile - Suitable for Pokémon and other graded trading cards housed in Ace slabs ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed to fit: Ace Graded slabs This bumper is sized specifically for Ace slab dimensions. It is not a universal protector and is not designed to fit PSA, BGS, CGC or other grading company slabs. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - 1 x bumper protection shell ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. PETG is a tough, impact-resistant material that handles everyday knocks well, making it well suited to a protective accessory. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Bumper shell only — graded card and slab not included. Items shown for illustration purposes only. This bumper is designed to fit Ace Graded slabs specifically. Fitment with other grading company slabs is not confirmed and cannot be guaranteed. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

GRADED CARD SLAB BUMPER FOR PSA / AP / PGS / PI / CGC / BGS SLABS A protective bumper designed to fit graded card slabs from the most widely collected grading companies. Slips over the slab to cushion corners and edges, helping to protect your graded cards from knocks and scuffs during storage or transit. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Protective corner and edge bumper for graded card slabs - Designed to fit PSA, AP and PGS slabs (combined variant) - Dedicated variants for CGC, BGS (Beckett) and PI Grading slabs - Press-fit design — no tools or adhesives required - Select your grading company variant from the options above ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY This bumper is offered in four variants, each sized for a specific slab format: - PSA / AP / PGS variant — fits PSA graded card slabs, AP grading slabs and PGS grading slabs - CGC variant — fits CGC graded card slabs - BGS variant — fits BGS (Beckett) graded card slabs - PI Grading variant — fits PI grading slabs Select the correct variant for your grading company at checkout. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. PETG is a tough, impact-resistant material that handles everyday knocks well and holds its shape under normal handling conditions. The finish is a consistent matte texture throughout. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Bumper only — graded card slab not included. Items shown for illustration purposes only. Not compatible with case sleeve foil or slab sleeves — the bumper fits the bare slab only. Remove any sleeve before fitting. Dispatched from the UK | Fast Posting | HSK 3D

GRADED CARD SLAB DISPLAY TOWER FOR ACE, PSA, TAG & COMPATIBLE SLABS A multi-tier rotating display tower for graded card slabs, designed to sit on and be driven by the included motorised electric turntable. Each tier holds slabs on every face, keeping your graded cards on show rather than locked away in a box. The screw-together tier connectors allow each tier to rotate independently, so any slab is easy to reach without moving the whole tower. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED - 24 graded card slab slots, one slab per slot per face - Screw-together interlocking tier connectors (each tier rotates independently) - Motorised electric turntable (included) drives the full tower display ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Confirmed compatible slab formats: - ACE graded card slabs - PSA graded card slabs - TAG graded card slabs - Other graded card slabs of similar dimensions PSA slabs are slightly thinner than ACE slabs. The tower is sized for ACE; PSA slabs fit but with a slightly looser tolerance — see photos for reference. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. PETG is tough and impact-resistant, handling knocks and temperature swings in an indoor display environment. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE The motorised electric turntable is included with this listing. The tower is designed specifically for standard graded slab dimensions. Slabs of significantly different dimensions may not seat correctly — check photos before ordering. PSA slabs are thinner than ACE slabs and will fit with a slightly looser tolerance in the standard tower. Dispatched from the UK | Fast Posting | HSK 3D

1/2" DRIVE 14-FLUTE CUP-STYLE OIL FILTER WRENCH — MULTIPLE SIZES A cup-style oil filter wrench with a 1/2" square drive and a 14-flute inner profile, designed to grip the end cap of common spin-on and cartridge oil filters. Available in eight sizes to cover a wide range of vehicles — from compact cars through to heavy-duty trucks and SUVs. The knurled outer ring lets you start or finish by hand, and the tapered load cone keeps force centred on the drive for a clean pull. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - 1/2" square drive (female) in the base — fits standard 1/2" ratchets and breaker bars - 14-flute inner profile grips OEM and aftermarket filter end caps - Tapered load cone centres force on the drive - Knurled outer ring for hand-tightening or loosening before using a ratchet - Thick walls and generous fillets for strength - Eight sizes available — order the size that matches your filter ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Choose the size equal to or 0.5–1.0 mm larger than your filter cap measurement (measured across the flats with calipers). If you are between sizes, choose the larger one. 63.5 mm — Honda Civic / Accord spin-on filters (select models); some older Toyota Corolla 64 mm — Toyota, Lexus, Scion (most 4-cylinder and V6 engines with cartridge filters); some BMW motorcycles 65 mm — GM vehicles — Chevrolet Cruze, Equinox (PF-xxx series filters) 67 mm — Nissan / Suzuki compact car filters; some Mitsubishi filters 68 mm — Ford EcoBoost 1.0L / 1.5L filters; some Hyundai / Kia models 73 mm — Subaru Impreza / Crosstrek (2020+); Volkswagen Golf TSI filters 74 mm — BMW 1-, 3-, 5-Series (N20/N26 engines); Audi A4; VW Passat and many European cars 76 mm — Heavy-duty trucks and SUVs — Ram 1500 Diesel; larger Ford / GM filters This list covers common applications. Always confirm your filter uses 14 flutes and measure your filter cap before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made in the UK from PETG. Matt textured finish. PETG is tough and impact-resistant with good oil resistance — well suited to workshop use. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Wrench only — 1/2" ratchet not included. Items shown for illustration purposes only. This wrench is designed for 14-flute oil filters. Confirm your filter uses 14 flutes before ordering — some manufacturers use a different flute count and this tool will not grip them correctly. Size selection is required at order. Measure across the flats of your filter cap with calipers and select the size equal to or 0.5–1.0 mm larger than your measurement. Example: a 73.2 mm cap — choose the 74 mm wrench. The vehicle and filter fitment list is based on common applications. Filter specifications vary by model year and engine variant. Always verify your specific filter size before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

CUTE HIPSTER READING GHOST DECORATION A charming multi-part ghost figurine printed in the UK from PETG, designed to bring cosy seasonal character to your home, desk or shelf. Cosied up with a good book and a warm hot chocolate, this hipster ghost is perfect for the spooky season and beyond. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - Ghost body - Bobble hat - Book - Hot chocolate mug - Left eye (marked L) - Right eye (marked R) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Printed in multiple parts for detailed multi-piece assembly - Eyes marked L and R corresponding to the ghost's own left and right - Sized to sit alongside other figures in the Cute Hipster Ghost collection - Suitable for shelf, desk or seasonal display ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY This figurine is a standalone decorative piece with no tool, case or vehicle compatibility. No regional part numbers apply. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Printed in the UK from PETG. Matt finish. Tough and impact-resistant, handling everyday knocks on a shelf or desk with ease. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE This figurine is supplied as separate parts requiring assembly. The book pages are designed to be glued into the book cover. The book cover is a thin, delicate part — please handle with care during assembly. Items shown in listing images are for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

CAULKING GUN & SEALANT CARTRIDGE STORAGE RACK A purpose-built wall-mounted storage rack that keeps your caulking gun and sealant cartridges organised and ready to use. The rack combines a horizontal gun cradle at the front, six upright cartridge slots at the rear, and dedicated cap and tip clips at one end — everything in one compact unit measuring 34.5 cm (13.6 in) in length. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED - 1 x manual caulking gun (cradle holds the gun with a cartridge loaded) - 6 x standard sealant or silicone cartridges (upright vertical slots) - Spare caps and tips (built-in clips at end of rack) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Horizontal front-loading cradle sized for a manual caulking gun, cartridge loaded or unloaded - Six vertical slots for standard sealant and silicone cartridges - Integrated cap and tip clips at the end of the rack - Wall-mountable design — integral mounting points on rear of unit - Overall length: 34.5 cm (13.6 in) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed to hold a standard manual caulking gun and standard 310 ml sealant or silicone cartridges. The gun cradle accepts the gun with a cartridge loaded. Please check the photos and your gun dimensions before ordering to confirm fit. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG — a tough, impact-resistant material that handles the knocks of a working workshop environment. Matt textured finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Storage rack only — caulking gun, cartridges and any mounting fixings are not included. Items shown for illustration purposes only. The rack features integral wall-mount points. Please check the photos for mounting detail and ensure you have suitable fixings for your wall type before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

SILICONE TUBE ORGANISER RACK FOR WORKSHOPS, SHELVES & SERVICE VEHICLES A sturdy, purpose-built rack that holds up to 10 standard silicone tubes upright, secure and within easy reach. Designed for workshops, garages, service vehicles and retail display shelving, it keeps tubes organised and stops them rolling or falling over. WHAT'S ORGANISED - 10 x standard silicone tubes (12 cm diameter x 30 cm length) - Two-row, ten-slot layout with deep-walled individual cups - Each slot holds a single tube securely upright ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed for standard silicone tubes measuring 12 cm diameter x 30 cm length. Suitable for workshop, garage, service vehicle and retail shelf use. Please ensure your tubes match these dimensions before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. PETG is a tough, impact-resistant material that handles workshop knocks, oil and temperature swings well. Matt textured finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Holder only — silicone tubes not included. Items shown for illustration purposes only. The holder is designed specifically for standard silicone tubes measuring 12 cm diameter x 30 cm length. Please ensure your tubes match these dimensions before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

LARGE HALLOWEEN WITCH CAULDRON CANDY BOWL & TREAT BUCKET A large 220mm (8.7") diameter witch cauldron, ideal as a Halloween candy bowl, spooky display prop or trick-or-treating treat bucket. Available as a cauldron-only version or as a treat bucket complete with a snap-fit carry handle for easy transport door to door. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - 220mm (8.7") diameter full-size cauldron body - Snap-fit carry handle included on the treat bucket version for secure carrying - Lightweight construction with a smooth, seamless outer finish - Suitable as a candy bowl, Halloween prop or trick-or-treating bucket - Sturdy and impact-resistant for seasonal use ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - Cauldron body - Snap-fit carry handle (treat bucket version only — requires snap-fit assembly on arrival) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY This cauldron is a standalone decorative item. No tool, case or vehicle compatibility applies to this product. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. The cauldron has a smooth, seamless outer finish with a consistent matt texture. PETG is tough and impact-resistant, handling knocks and general seasonal use with ease. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE The snap-fit carry handle (treat bucket version) requires simple assembly on arrival — press the handle into the cauldron body at the snap-fit points. Intended for use as a decorative candy bowl or treat bucket. Filament food-safety has not been independently certified — do not use with unwrapped food items. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

PROTECTIVE CASE FOR TANDEM MOBI INSULIN PUMP A hard shell protective case designed to fit the Tandem Mobi insulin pump. The case surrounds the pump with a friction-fit design that requires no adhesives and is still easy to remove when needed. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - 1 x protective case for the Tandem Mobi insulin pump ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Hard shell outer design - Air pockets on all sides to cushion the pump - Cut-out for tubing access - Friction fit — no adhesives required, easy to remove ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed to fit the Tandem Mobi insulin pump. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made in the UK from PETG — a tough, impact-resistant material that handles knocks and temperature variation well. Matt finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Case only — the Tandem Mobi insulin pump is not included. Items shown for illustration purposes only. This is an aftermarket accessory and is not manufactured by or affiliated with Tandem Diabetes Care. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

PROTECTIVE COVER FOR DEXCOM G7 CONTINUOUS GLUCOSE MONITOR This hard-shell protective case fits directly over the Dexcom G7 CGM sensor, shielding it from pressure while you sleep or move about during the day. Designed to sit flush over the sensor with no adhesives, it lifts away easily when needed. The case is aimed at Dexcom G7 users who experience pressure lows or signal loss when lying on the sensor side — a common frustration during sleep or daily activity. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Hard-shell design to help prevent pressure lows and signal losses - Air pockets on all sides surrounding the sensor to cushion against impact - Side vents to allow airflow and prevent overheating - Friction-fit design — no adhesives required, easy to remove ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed to fit: Dexcom G7 CGM sensor This case is designed specifically for the Dexcom G7. It is not compatible with other Dexcom generations. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - 1 x Dexcom G7 protective case ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG — a tough, impact-resistant material that handles everyday knocks and temperature swings. Matt finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Case only — Dexcom G7 sensor not included. Items shown for illustration purposes only. This product is a protective accessory only and is not a medical device. It is not intended to diagnose, treat, cure or prevent any medical condition. Always follow the guidance of your healthcare provider regarding your CGM sensor. This case sits directly against the skin over the sensor. If you have sensitive skin or known material sensitivities, please consider suitability before use. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

CENTRE CONSOLE STORAGE ORGANISER FOR BMW 1, 2, 3, 4 SERIES, M2, M3, M4 & i8 A custom-fit storage organiser designed to sit in the centre console recess of BMW F-series models. It provides a credit-card-sized slot for lock cards, wallets, fuel cards and bank cards, plus two coin holders for storing loose change neatly within reach. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED - 1 x credit-card-sized slot (lock cards, wallet cards, fuel cards, bank cards) - 2 x coin holders for loose change ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY BMW 1 Series - F20 (5-door, 07/2010-02/2015) - F20 LCI (5-door, 05/2014-06/2019) - F21 (3-door, 07/2010-02/2015) - F21 LCI (3-door, 05/2014-06/2019) BMW 2 Series - F22 Coupe (10/2012-06/2017) - F22 LCI Coupe (09/2016-12/2019) - F23 Convertible (03/2014-06/2017) - F23 LCI Convertible (09/2016-12/2019) BMW M2 - F87 Coupe (11/2014-06/2017) - F87 LCI Coupe (09/2016-06/2018) BMW 3 Series - F30 Saloon (02/2011-07/2015) - F30 LCI Saloon (09/2014-10/2018) - F31 Touring (07/2011-07/2015) - F31 LCI Touring (09/2014-06/2019) - F34 GT Gran Turismo (07/2012-06/2016) - F34 GT LCI Gran Turismo (09/2015-12/2019) BMW M3 - F80 Saloon (04/2012-06/2015) - F80 LCI Saloon (01/2015-10/2018) BMW 4 Series - F32 Coupe (11/2012-02/2017) - F32 LCI Coupe (05/2016-12/2019) - F33 Convertible (03/2013-02/2017) - F33 LCI Convertible (05/2016-12/2019) - F36 Gran Coupe (07/2013-03/2017) - F36 LCI Gran Coupe (05/2016-12/2019) BMW M4 - F82 Coupe (02/2013-02/2017) - F82 LCI Coupe (05/2016-12/2019) - F83 Convertible (06/2013-02/2017) - F83 LCI Convertible (05/2016-12/2019) BMW i8 - I12 Coupe (02/2013-02/2018) - I12 LCI Coupe (11/2016-11/2019) - I15 Roadster (01/2017-11/2019) All models listed share the same F-series centre console recess. Please check your chassis code against the list above before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. Tough and impact-resistant with a consistent matt finish that suits the factory interior. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Organiser insert only — no other items are included. Cards and coins shown for illustration purposes only. The coin holders are sized for Euro coins. UK buyers should check that pound coin diameters are compatible before ordering — please refer to the photos for sizing guidance. Fitment is designed to suit the chassis codes listed. If your vehicle has a modified or non-standard centre console, please verify fit against the photos before purchasing. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

UNICORN HORN & EARS HEADBAND A unicorn headband featuring a central horn and two ears, made to complete a unicorn fancy dress costume or party look. The headband is 120 mm in diameter, giving a comfortable fit for most wearers. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED / FEATURES - Unicorn horn centrepiece - Two unicorn ears, one either side - 120 mm diameter band — fits most adults and older children - Scalable to larger sizes ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed as a standalone fancy dress accessory suitable for unicorn costumes, themed parties and events. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - 1 x unicorn headband with horn and ears ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. Sturdy and impact-resistant, holding its shape through regular wear. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Fancy dress costumes and accessories shown for illustration purposes only — only the headband is included. This is a wearable accessory. Please ensure it is suitable for the intended wearer's age group before use. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

CAKE POP DISPLAY STAND WITH HAPPY BIRTHDAY TOPPER A multi-part cake pop display stand made in the UK from PETG. The tower holds cake pops securely on standard sticks, keeping them upright and evenly spaced for a clean party table presentation. The Happy Birthday topper adds a decorative finishing touch straight out of the box. Designed to address common issues with earlier versions — the tower is sized to hold cake pops firmly, with deeper stick holes that prevent wobble and support even larger cake pops securely. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Tower height: 182.5 mm, width: 30 mm - Circular base: 2.5 mm thickness for stability - Deep stick holes prevent wobble and hold cake pops securely upright - Stick hole diameter: 3.5 mm (standard) or 4.5 mm (wide-hole variant) — please check the variant selected at checkout - Happy Birthday decorative topper included - Multi-part press-fit assembly — no tools or adhesive required ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - Cake pop stand tower - Circular base - Happy Birthday decorative topper ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed for standard cake pop sticks. The 3.5 mm (standard) hole variant fits most widely available cake pop sticks. The 4.5 mm (wide-hole) variant accommodates slightly thicker sticks. Please select the correct hole size at checkout based on the sticks you intend to use. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. Tough and impact-resistant, handling everyday knocks with ease. Matt finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Display stand only — cake pops, sticks and any food items shown in photos are for illustration purposes only and are not included. This stand is intended for display and presentation purposes. It is not certified for direct food contact. The stand is supplied as separate parts (tower, base and topper) which press-fit together. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

119MM 6-POINT FUEL FILTER SOCKET TOOL FOR GM DIESEL ENGINES A 119mm 6-point fuel filter socket tool designed to remove and refit the General Motors diesel fuel filter housing found across a wide range of Vauxhall, Fiat, Alfa Romeo and Lancia models. Sized specifically for the 119mm filter canister, it engages all six points for a secure grip, giving you the leverage needed to break a seized filter loose without slipping or rounding the housing. Designed for home mechanics and trade technicians working on GM-platform diesel engines — a tool that is otherwise difficult to source for this specific filter size. Please message after ordering to indicate if you require 1/2 or 3/8 drive. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - 119mm diameter, 6-point socket profile - Square drive insert accepts 1/2 inch or 3/8 inch drive ratchet or breaker bar - 6-point engagement distributes torque evenly around the filter canister - Designed for the GM diesel fuel filter housing (filter ref: 13179060) - One-piece construction — no separate parts to lose ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Compatible with GM-platform 1.3, 1.9 and 2.4 diesel engines fitted to the following vehicles: Vauxhall - Vectra C (1.3, 1.9, 2.4 diesel) - Signum (1.3, 1.9, 2.4 diesel) - Astra H (1.3, 1.9, 2.4 diesel) - Corsa C (1.3, 1.9, 2.4 diesel) - Combo (1.3, 1.9, 2.4 diesel) - Meriva (1.3, 1.9, 2.4 diesel) Fiat, Alfa Romeo and Lancia - Compatible models fitted with the same 1.3, 1.9 and 2.4 GM diesel engine family - Specific model list not exhaustive — check that your vehicle uses the 119mm GM fuel filter housing before ordering ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. PETG is a tough, impact-resistant material that handles the knocks of regular workshop use and resists oils and greases encountered during filter changes. Matt textured finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Socket tool only — ratchet, breaker bar and screwdriver handle are not included. Items shown in use for illustration purposes only. This tool is designed for hand-tool torque. Do not use with an impact driver or air gun. Always confirm your vehicle's fuel filter housing diameter matches 119mm before ordering. Fiat, Alfa Romeo and Lancia model coverage is based on shared GM engine platform fitment — verify compatibility against your filter housing if in doubt. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

PAINTBALL POD LOADING FUNNEL A compact loading funnel designed to fit standard paintball pods with a 60.50 mm inner diameter. Speeds up reloading by guiding paintballs cleanly into the pod without spillage, keeping you moving on the field. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED / FEATURES - Wide 100 mm outer diameter mouth for easy scooping and directing of paintballs - 60.50 mm inner diameter throat sized to seat on standard paintball pods - Compact funnel profile for quick one-handed use during reloading ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - 1 x paintball pod loading funnel ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed to fit paintball pods with an inner diameter of 60.50 mm and an outer diameter of 100 mm. Check your pod's opening diameter before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. Tough and impact-resistant with a smooth finish that handles regular field use. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Funnel only — paintball pods, paintballs and any other items shown for illustration purposes only are not included. Fits pods with a 60.50 mm inner diameter. Buyers should confirm their pod's opening measurement against the dimensions stated before purchasing. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

100-BALL PAINTBALL POD WITH SNAP LID A 100-ball capacity paintball pod with a snap-action lid, designed to fit standard paintball pod holders. Printed in the UK from PETG for a tough, reliable build that handles the knocks of active field use and regular reloading. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED / FEATURES - 100-ball capacity pod body - Snap-action lid for fast, reliable access during play - Lid tethered to pod body via zip tie — stays attached and ready - Fits standard paintball pod holders ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - Pod body (100-ball capacity) - Snap lid (tethered to pod body via zip tie) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed to fit standard paintball pod holders. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. Tough and impact-resistant, built to handle the demands of field use and regular reloading. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Pod and snap lid included. Paintballs not included. Items shown for illustration purposes only. The lid is tethered to the pod body with a zip tie as shown in the photos. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D